![]() On all Aer RGB 2 Fans you will find two ports labeled as In and Out, just like the flags on the cables. For our example, we'll be using the short 200mm variety as shown below The versions you will have will vary based on the product purchased, so please check your manual to confirm the type included. These cables come in two different sizes: How do I connect additional Aer RGB 2 fans (daisy-chaining)?Ĭonnecting additional Aer RGB 2 fans is fairly easy, only requiring an additional fan as well as the NZXT Fan-to-Fan Cable included with your fan kit. From here, start the PC and if connected properly the Aer RGB 2 fan should light up in its default White color or in Rainbow Spectrum for certain controllers. For our example, we will be connecting to LED 1 as shown below.įrom here, we will connect the In end to the port labeled In on the Aer RGB 2 fan. Take the Out end of the Fan Connection Cable and connect it to an open RGB or LED port on your controller. The larger cable Out end will connect from the Controller to the Fan, while the smaller Out end will connect one fan to another NZXT RGB device. When compared to other cables included with the kit, you'll find that the Out end will be larger for the Fan Connection Cable as shown below. To start, we will connect the Fan Connection Cable to our Aer RGB 2 Fan. Whether you purchased a single NZXT Aer RGB 2 fan or a multi-pack like the one for this example, you'll find four types of NZXT RGB cables, all marked with an In and Out flag at their ends. Keep in mind the following: Connecting the Fan to the RGB ControllerĪll Aer RGB 2 fans will include a pair of cables that will need to be connected in order for the fan to work:īoth of these cables will need to be connected for the fan to work, however for this guide we will be focusing on the RGB side. If you need additional USB 2.0 headers, you can use a powered USB Internal hub like our NZXT Internal USB Hub. To get around these limits, you can add additional NZXT RGB Controllers to your system as long as you have available USB 2.0 headers. Can I use multiple NZXT RGB Controllers in my PC? ![]() This means if you use the maximum number of LEDs per channel (40), only 3 channels will be usable. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |